Welding robots
Robotic Welding Cube
A compact, fully enclosed robotic MIG welding cell with two fixed load bays. The robot welds in one bay while your operator loads the other, so welding never stops.
Why it works
Built for steady, repeatable production
Welding never stops
The robot welds in one bay while the operator loads the other.
Repeatable quality
Fixed fixtures hold every part in the same place, so every weld follows the same path.
Set up for your parts
Fixtures and programs are configured for your part family.
Safe by design
Fully enclosed bays with interlocked access and weld-arc protection.
What it does
Two bays, one robot, no waiting
The cube automates MIG welding on fixed jigs in two alternating bays. While the robot runs a programmed weld sequence in one bay, the operator prepares the next job in the other.
- Two fixed load bays for alternating production
- Fixed part datums for repeatable weld paths
- Teach pendant or HMI operation
- Status light tower, alarms and fault messages
- Built to AU/NZ safety requirements, with guarding and interlocks
How it works
Load, weld, swap, repeat
01
Load
The operator loads parts into the Bay A fixture and confirms ready.
02
Weld
The robot runs the programmed weld path with controlled parameters.
03
Load the other bay
While Bay A runs, the operator unloads and loads Bay B, outside the weld zone.
04
Swap and repeat
When the cycle ends, the cell swaps bays and keeps going.
Options and uses
Configured for your work
Options
- Fronius power source to suit your duty cycle
- Torch service and calibration
- Fume extraction interface
- Weld quality checking (optional)
- Production data capture (optional)
- Forklift pockets for moving the cell
Typical parts
- Fabricated and structural parts
- Frames and brackets
- Pipe spools and assemblies
- High-volume MIG welding of repeat parts
How we supply it
- Standalone cell for your existing workshop
- Integrated cell with material handling, data capture and inspection
See it running
The welding cell at work
Related machines
You might also need
Service & support
Supported by the people who built it
Every Mexx machine is designed, built and commissioned by our own engineers, who stay on to support it. Service contracts include scheduled maintenance, spare parts, remote login and 24/7 on-call support, for machines across Australia and New Zealand.
Machines designed and built for
PACT GROUP
Next step
Talk to us about robotic welding
Tell us about your parts, volumes and floor space. An engineer will get back to you within one business day.